Manufacturing

Custom packages designed and constructed to your exact specifications.

Custom packages designed and constructed to your exact specifications

ASME "U" Stamp Vessel Manufacturing
2 facilities in central Alberta
CWD Certified
Engineering & Design
Re-manufacturing & re-conditioning

Our experienced team of process design experts provide engineering, design, fabrication, testing, delivery and installation within the shortest possible lead times—for seamless project execution and fast start-up.

Manufacturing

NRG is the managing partner of two facilities in Central Alberta. We also have partnerships in place with other manufacturers to further help us find the best solution for our clients.

Cape Manufacturing LTD.

Cape is the NRG Group’s largest manufacturing arm whose core strength lies in the ability to produce oilfield process equipment. Based near Halkirk, Alberta. Cape’s strategic rural location on the high load corridor offers clients high quality and low cost manufacturing solutions.

Cape Manufacturing Ltd is a U Stamp, ASME Section VIII Div 1, CWB certified fabrication shop. Our specialty is building and packaging large heavy vessels. We strive to build high quality production equipment, on-time and on budget.

“Passionate People Producing Premium Products”

Over 45,000 Square Feet of Shop Space
(8) Eight 22′ x 22′ Bay Doors
(2) Two 24′ x 22′ Bay Doors
(1) One 26′ x 22′ Bay Door
(1) One Large Paint Booth
(2) Two 20 Ton Shop Cranes
(7) Seven 2 Ton Shop Cranes
Two feet thick concrete in certain areas to handle large, heavy packages.
Rail Road Track for efficient moving of packages through the stages of manufacturing.

Westcan Fabricating LTD.

Westcan Fabricating was started in 2013 in Ponoka, Alberta with the goal to be the leading provider of re-manufactured, reconditioned, and new oilfield equipment in the area. Westcan has the ability to complete ASME U Stamp welding, CWB welding as well as custom projects for smaller clients. This includes trailer and truck bed reconditioning, light hauling and lifting, sandblasting & painting.

New in 2016, Westcan is now the only Oilfield Supply Store in Ponoka, Alberta.

“Good People, Good Products.”
7,000 Square feet of shop space.
Located on 2.5 Acres of land
Two 2 ton cranes
12 Ton Forklift
1.5 Ton Forklift
8 Ton Mobile Crane

Specializing in Pressure Vessel Packaging
Custom packages designed and constructed to your exact specifications. Our experienced team of process design experts provide engineering, design, fabrication, testing, delivery and installation within the shortest possible lead times—for seamless project execution and fast start-up.
Specializing in Large Pressure Vessel Manufacturing
NRG can fabricate pressure vessels made out of Carbon Steel (including Low Temp CS A350 LF2) and Stainless Steel (304/L or 316/L) . The sizes ranges from 6″ OD to 110″ OD with vessel thickness up to 2″ thick. Our shop can accommodate vessel weights up to 40,000 lbs (20 tons) max. We have certified welders, pipe-fitters and QC inspectors plus credible subcontractors to satisfy NDE requirements (X-ray, Hardness and PWHT) per project specifications.
Skids – Structural Steel Welding (CWB Certified)
Skids

Structural skid manufacturing is a core service offered by Cape. We strive to keep our designs simple, while keeping in mind strength, lifting points and allowing fabrication to be highly efficient, which results in cost savings for our clients. We have developed an exception reputation for our designs of structural steel skids. Cape is a fully CWB certified welding fabrication facility and we build to the CWB standard
Sample Tubs – Structural Steel Welding (CWB Certified)

Sample Tubs

Sample tubs are typically installed on Treaters & FWKO’s in order to verify the quality of the oil at different heights in the vessel. A simple design is a tank with the ability to easily collect the sample without spilling oil. A more elaborate design has provisions to collect fumes and exhaust them out the building. Typically a sample tank is paired with a blowcase (pictured). This forces any excess fluid in the sample tank to be pumped into the drain or recycle system. Each of these are custom designed to fit your package, however we do have standard units available for field retrofit
Platform & Ladders – Structural Steel Welding (CWB Certified)
Platform & Ladders

In order to reduce field installation cost and improve operator friendliness, we can offer option pricing to install platforms and ladders onto any package that may require it. We can customize the design to your project and build to any standard required.
CAPE Manufacturing Ltd.
Cape Manufacturing Ltd is a U Stamp, ASME Section VIII Div 1, CWB certified fabrication shop. Our specialty is building and packaging large heavy vessels. We strive to build high quality production equipment, on-time and on budget.

“Passionate People Producing Premium Products”

Over 45,000 Square Feet of Shop Space
- (8) Eight 22′ x 22′ Bay Doors
- (2) Two 24′ x 22′ Bay Doors
- (1) One 26′ x 22′ Bay Door
- (1) One Large Paint Booth
- (2) Two 20 Ton Shop Cranes
- (7) Seven 2 Ton Shop Cranes
- Two feet thick concrete in certain areas to handle large, heavy packages.
- Rail Road Track for efficient moving of packages through the stages of manufacturing.
ASME “U” Stamp Pressure Vessel Manufacturing & Packaging

Custom packages designed and constructed to your exact specifications. Our experienced team of process design experts provide engineering, design, fabrication, testing, delivery and installation within the shortest possible lead times—for seamless project execution and fast start-up.